Presented by Ruth & Jack Ham on April 29, 2018
PRODUCT LIST FOR WOOD REFINISHING AND RESTORATION
EXTERIOR WOOD REFINISHING PRODUCTS
Stripping Products
Jasco Premium Paint and Epoxy Remover (available at Lowe’s)
Denatured Alcohol and Fine Steel Wool for hard to get places
Finishing Products
Orbital Sander: 40 grit will remove paint; Use 80 grit up to 120 grit or if you like 180 grit before applying polyurethane
Use a detail sander for getting into corners and tight spaces – Festool makes a very good detail sander
After finishing sanding, vacuum off the finish surface to remove all the light sawdust, before applying finish
Sikkens Cetol Teak for First Coat – takes at least 6 to 8 hours to dry
Sikkens Cetol 23 Plus RE for Top Coat – apply top coat within 5 days of first coat
Sikkens Cetol 23 Plus RE for maintenance coat applied every 2-3 years.
*Sikkens Products are available at Ace Hardware and PPG paint store on Saginaw Road
INTERIOR WOOD REFINISHING PRODUCTS
Stripping Products
Jasco Premium Paint and Epoxy Remover (available at Lowe’s)
Finishing Products
Benjamine Moore Benwood Stayclear Acrylic Polyurethane Finish (Flat)
3-4 coats with light sanding in between coats this is a brush on finish
You can use a rub on finish as well –
Use the Orbital Sander and detail sander as required starting with 40 grit then progressing to 80, 120, 150 and 200